Pharmaceutical Sector


We manufacture the equipment and full production lines to integrate all stages of the process from the primary packaging, including bottle and vial filling and capping, through to the secondary packaging, involving cartoning and case packing.

Integrated ITEM SERIALISATION AND CODINGsolutions, using a broad range of technologies, accessories and printing, marking and traceability supplies , thus offering an all-round solution and ensuring total integration



PRIMARY AND SECONDARY PACKAGING LINE




SECONDARY PACKAGING LINES




The Engineering Department at RUBIAL MAIN, designs and produces pressure containers for any type of process, in conformance with the European Pressure Equipment Directive PED 2014/68/EU and under any design code requested, ASME, AD-MERKBLATTER…



RUBIAL offers you the option to custom-engineer the platform to your industry needs, modifying any piece of equipment and adapting it to the real needs of the customer, , by developing auxiliary components adapted to its function, its location or to the number of operators using it, with total flexibility, and guaranteed delivery times.





Single washbasin manufactured from AISI 304 stainless steel sheet, available in a SATIN finish. Supplied with stainless steel water tap, Hip/Knee operation and water mixer.





Sizes
Code Single washbasin High Width Fund
LV-M-001 Wall Side 544 mm 400 mm 330 mm
LV-P-001 With Pedestal 1200 mm 400 mm 330 mm

Options:

• Pedal operation

• Sensor operation

• Thermostat valve

• Soap holder



Multi-place washbasin manufactured from AISI 304* stainless steel sheet, available in a SATIN finish or glass bead BLASTED finish. Protective frame with hidden Hip/Knee operation fitting, thermostatic mixing valve and stainless-steel water tap.
* Optional manufacture in other materials.



Sizes
Code Group washbasin Width A Fund B High C Height D
LV-P-002 Washbasin 2 Taps 1000 mm 500 mm 700 mm mm
LV-P-003 Washbasin 3 Taps 1500 mm 500 mm 700 mm mm
LV-P-004 Washbasin 4 Taps 2000 mm 500 mm 700 mm mm
LV-P-005 Washbasin 5 Taps 2500 mm 500 mm 700 mm mm
LV-P-006 Washbasin 6 Taps 3000 mm 500 mm 700 mm mm

Options:

• Pedal operation

• Sensor operation

• Thermostat valve

• Soap holder 1L

• Wastepaper bin



Multi-place washing-up sink manufactured from AISI 304* stainless steel sheet, available in a SATIN finish or glass bead BLASTED finish.
* Optional manufacture in other materials.






Wastepaper bin manufactured from AISI 304* stainless steel sheet, available in a SATIN finish or glass bead BLASTED finish.
* Optional manufacture in other materials.


1. Wastepaper bins with standard lid



2. Pedal operated wastepaper bin with standard lid



3. Wastepaper bin with standard swing lid


4. Standard pedal-operated bin-bag holder



Sizes
Code Wastepapers Hight Width Fund
C-P-001 Wastepaper bins with standard lid 750 mm 400 mm 400 mm
C-PP-001 Pedal operated wastepaper bin with standard lid 750 mm 400 mm 400 mm
C-PT-001 Wastepaper bin with standard swing lid 800 mm 500 mm 350 mm
C-PB-001 / C-PB-P-001 Standard pedal-operated bin-bag holder


Manufactured from AISI 304* stainless steel sheet, available in a SATIN finish.
* Optional manufacture in other materials.




Manufactured from AISI 304* stainless steel sheet, available in a SATIN finish.
* Optional manufacture in other materials.




Manufactured from AISI 304* stainless steel sheet, available in a SATIN finish or glass bead BLASTED finish.
* Optional manufacture in other materials.



Code Paper roll holder Coil Diameter
C-PR-001 Coil paper roll holderl 200 mm
C-PR-002 Coil paper roll holder 400 mm


Manufactured from AISI 304* stainless steel sheet, available in glass bead BLASTED finish.
* Optional manufacture in other materials.




Manufactured from AISI 304* stainless steel sheet, available in glass bead BLASTED finish.
* Optional manufacture in other materials.





Drains manufactured from AISI 304* stainless steel sheet, available in glass bead BLASTED finish.
* Optional manufacture in other materials.


1. Standard vertical drain



2. Standard horizontal drain



The drain models are made to the following standard measurements:

Code Drain Output Ø Output Pipe Basket Small Gutters Option
D-SV-15-9-0 150X150X90 VERTICAL 50 NO NO
D-SH-20-13-0 200X200X130 HORIZONTAL 50 NO NO
D-SV-20-13-0 200X200X130 VERTICAL 50 NO NO
D-SV-25-15-0 250X250X150 VERTICAL 90 YES NO
D-SV-25-21-1 250X250X210 VERTICAL 90 YES YES
D-SH-25-15-0 250X250X150 HORIZONTAL 90 YES NO
D-SH-25-18-1 250X250X180 HORIZONTAL 90 YES YES
D-SV-30-15-0 300X300X150 VERTICAL 100 YES NO
D-SV-30-21-1 300X300X210 VERTICAL 100 YES YES
D-SV-30-29-1 300X300X290 VERTICAL 100 YES YES
D-SH-30-18-0 300X300X180 HORIZONTAL 100 YES NO
D-SH-30-21-1 300X300X210 HORIZONTAL 100 YES YES
D-SH-30-26-1 300X300X260 HORIZONTAL 100 YES YES

Other options and measurements on request from the customer.

Options:

• Syphon floor drain with leak-proof lid

• Detachable syphon drain

• Flanged joint

• Welded joint

• Special drain with multiple outlets

• Round, leak-proof drain




Gutters manufactured from AISI 304* stainless steel sheet, in a glass bead blasted finish.
* Optional manufacture in other materials.


Options:

• Welded drain joint

• Flanged drain joint

• Reinforcing and sealing gutter wing fill


Lengths made to order (maximum 12,000 mm)


Channels


Channels manufactured from AISI 304* stainless steel sheet, in a glass bead blasted finish with outlet to standard or integrated drain.
* Optional manufacture in other materials.


Standard widths of channels and grids:

• 150 mm

• 200 mm

• 300 mm


Other widths made on request from the customer.

Lengths made to order (maximum 12,000 mm)

Options

• Flange for sealing waterproof fabric



Grids



Drip boxes manufactured from AISI 304* stainless steel sheet, in a glass bead blasted finish.
* Optional manufacture in other materials.


Options:

• Smooth LID leakproof drip box

• Perforated LID leakproof drip box

• Refillable leakproof drip box

• Leakproof drip box with Integrated Drain




Manufactured out of AISI 304 stainless steel, with ø89 mm or ø104 mm tubing, including attachment flange or built into the floor.




Manufactured out of AISI 304 stainless steel, with ø89 mm or ø104 mm tubing, including attachment flange or built into the floor.





Made from 2 mm thick AISI 304* stainless steel sheet, fillable.* Optional manufacture in other materials.



Options:

• Stainless steel coping



1. Centre table



2. Wall Side-table



3. Draining table



4. Tables with Basins - Sinks



5. Vibrating/compaction tables - BIG BAG



6. Tables with adjustable guidelines



7. Rotary Lung Table


Made from AISI 304 stainless steel.

• Plate with variable diameter

• POM Guided.

• Operated by a direct drive gear motor

• Fixed speed of 4 rpm

• On/off electrical box

• Emergency stopper

• Adjustable feet M16 × 100 mm



Made to order from AISI 304* stainless steel in several finishes.
* Optional manufacture in other materials.


1. Tray trolleys


Trolley with perforated/flat tray

Trolley with hinged front tray and perforated or non-perforated base.

Hinged front tray with perforated or non-perforated base.


2. Autoclave trolley and chassis


Autoclave trolley and chassis

Autoclave trolley


3. Transport trolleys


Two-shelf trolley


Transport trolley



Mobile platform


4. Carton trolleys


Three-level trolley for cartons


5. Drying and filtering trolleys


Sample trolley

Filtering trolley with adjustable-height shelf



Custom-made to industry needs, RUBIAL manufactures walkways, platforms and ladders for ease of access to higher areas and for the maintenance of the plant facilities.



Ladder with several steps



1. Dressing rooms - Lockers


Made from AISI 304* stainless steel, with 1, 2, 4 or 5 modules and 1 or 2 doors per module. Double-ventilation, key-locking doors. Sloped roof. Height-adjustable legs.


Three-compartment, two-level locker


Four-compartment, one-level locker


Code Modules Sizes
Width x fund x hight
Doors per module
TA-1M-1P Locker 1 module 310 x 440 x 2025 mm 1
TA-2M-1P Locker 2 modules 595 x 440 x 2025 mm 1
TA-4M-1P Locker 4 modules 1165 x 440 x 2025 mm 1
TA-5M-1P Locker 5 modules 1445 x 440 x 2025 mm 1
TA-1M-2P Locker 1 module 310 x 440 x 2025 mm 2
TA-2M-2P Locker 2 modules 595 x 440 x 2025 mm 2
TA-4M-2P Locker 4 modules 1165 x 440 x 2025 mm 2
TA-5M-2P Locker 5 modules 1445 x 440 x 2025 mm 2

Options:

* Can be made from other materials.

• Master-key locks

• Keyless coded lock

• Individual identification

• Custom-made built-in wall lockers


Custom-made built-in wall lockers


Hangers


2. Dressing rooms - Benches


Benches made from AISI 304 stainless Steel, seat 2 mm thickness, tubular legs with adjustable foot, glass bead blasted finish.


Custom-made dressing room benches


Code Sizes
Length x Width x Height
BCH-1-10 1080 x 400 x 400 mm
BCH-1-20 2080 x 400 x 400 mm
BCH-1-30 3080 x 400 x 400 mm

3. Dressing rooms - Boot hanger, inclined boot/shoe sole


Made from AISI 304* stainless Steel, suitable for both boots and shoes. The hanging position of the sole allows water and dirt to drain out of the shoe by force of gravity.


Standard sizes:


Code Boot hanger Sizes
Length x Width x Height
Pair boots / shoes
CBT-A-10 Tube holder with self-supporting frame 730 x 500 x 1840 mm 10
CBT-A-20 Tube holder with self-supporting frame 1340 x 500 x 1840 mm 20
CBT-A-30 Tube holder with self-supporting frame 1950 x 500 x 1840 mm 30
CBT-A-40 Tube holder with self-supporting frame 2430 x 500 x 1840 mm 40

Options:


• Can be made from other materials

• Frame for wall mounting



• Frame in closed cabinet with/without sterilisation



4. Dressing rooms - Boot hanger, sole in flat position



Standard sizes:


Code Boot hanger Sizes
Length x Width x Height
Pair boots / shoes
CBV-A-10 Rod support with self-supporting frame 730 x 500 x 1840 mm 10
CBV-A-20 Rod support with self-supporting frame 1340 x 500 x 1840 mm 20
CBV-A-30 Rod support with self-supporting frame 1950 x 500 x 1840 mm 30
CBV-A-40 Rod support with self-supporting frame 2430 x 500 x 1840 mm 40

Options:


• Can be made from other materials.

• Frame for wall mounting



• Frame in closed cabinet with/without sterilisation



5. Dressing rooms - Boot dryer


Manufactured from AISI 304* stainless steel, available in glass bead BLASTED finish.


• A 50 W fan with timer blows warm air inside the boot pegs.

• Valve on each peg so that air is blown only through those holding a shoe/boot.

• Air heated by 2000 W electrical heating elements with thermostat.

• Ozone germicide lamp


Options:


• Capacity: 60 boots-shoes

• Capacity: 30 boots-shoes



6. Cabinets and Shelving units


Made from AISI 304* stainless steel, with/without shelves, in a variety of finishes. Standard or custom-made design to meet customer’s needs.* Optional manufacture in other materials.


Low cabinet


Low key cabinet


Sliding door cabinets


Hinged door cabinets


Modular shelving unit


Mobile shelving unit



Custom-made computer/electrical cabinets to hold all operating control instruments required for your plant equipment and facilities. RUBIAL builds the cabinets according to industry regulations and to customer specifications.


Computer cabinet